Products and Services

Products and Services

  info@alemlube.co.nz  1300 159 311
Search Results – 78 products found for: Ravaglioli
Product

Ravaglioli Automatic Tilt Back Tyre Changer with PLUS83 Helper Arm

Ravaglioli

Product Code: G7645IV.26-A

• Automatic 26" tyre changer with mount/demount device and rotating arm (includes assist arm PLUS83)
• The extra height of the vertical post and tool shaft allow easy servicing to any type of tyre to a maximum of 14" (355 mm) width
• Tool shaft has increased rigidity due to its tilted construction and allows for easier operation with extra-large tyres
• Suitable for large tyre shops
• Maximum rim width 17" (431mm)
• Maximum tyre diameter 45" (1,143mm)
• 12" - 28.5" internal clamping and 10" - 26" external clamping
• Manufactured in Italy

Product

Ravaglioli Automatic Tilt Back Tyre Changer

Ravaglioli

Product Code: G7645IV.26

• Automatic 26" tyre changer with mount/demount device and rotating arm
• The extra height of the vertical post and tool shaft allow easy servicing to any type of tyre to a maximum of 14" (355 mm) width
• Tool shaft has increased rigidity due to its tilted construction and allows for easier operation with extra-large tyres
• Suitable for large tyre shops
• Maximum rim width 17" (431mm)
• Maximum tyre diameter 45" (1,143mm)
• 12" - 28.5" internal clamping and 10" - 26" external clamping
• Manufactured in Italy

Product

Ravaglioli 5.0t Electro-Hydraulic 4-Post Wheel Alignment Hoist

Ravaglioli

Product Code: RAV4502L

Extra-long platforms for total wheel alignment with front turning plates locations and rear slip plates

Hydraulic cylinder is located inside the fixed platform and thus perfectly protected

High resistant, galvanised and pre-stretched metal cables

Automatic mechanical back-up safety devices (every 100mm) with pneumatic release allowing stationary operation with unladen cables

Manufactured in Italy

Product

Ravaglioli 2-Post 3.5t Electric Vehicle Hoist

Ravaglioli

Product Code: KPX357EV

• 3.5t lifting capacity

• 3 phase power supply

• 2 x 2.6Kw motors

• Versatile lifting of all vehicle types, EV and conventional

• Low profile arms rotating terminal easily reaches pick up points by moving the arm body away from the chassis

Lifting arms can operate either straight or tilted up to 90 

• High strength, high quality components

• Minimal arm space requirement allows obstacle-free underbody work on wheels, brakes and suspension

• Clearance between columns of 2,625mm

• Maximum lift height of 1,900mm

• Easily modified for low ceiling heights down as low as 3,100mm

• Minimum arm length of 607mm

• Maximum arm length of 1,200mm

• Designed in Europe

• Manufactured in Italy

Product

Ravaglioli 3000S Plus 3D Wheel Aligner

Ravaglioli

Product Code: RAVTD3000SP.B

Exclusive 3D targets: - extremely light - no electronic components inside - no maintenance required

Data bank with more than 90,000 vehicle data sheets

Equipped with tyre grabbing 4 point clamps to avoid run out compensation – Extremely fast

Can be used on any 4-post or scissors lift and has automatic lift level compensation

Equipped with 2 space saver sensors and 4 high resistance plastic targets to detect all vehicle angles in just few seconds

Bluetooth transmission between measuring heads and control unit

Use the aligner in more than one bay location (optional supports required). Can be used at any height

Manufactured in Italy

Product

Ravaglioli 3D All-On-Wall Wheel Alignment System

Ravaglioli

Product Code: RAV3D2.0WALL3S

Space Saving Wheel Alignment

• Wall mounted wheel alignment system saving space using a wall

  mounted tablet, wall mounted 3D measuring heads and clamps

• 2 compact and lightweight 3D measuring heads

• PC free Bluetooth enabled lightweight tablet with adhesive
   magnets for wall mounting

• Set of four wall mounted self-centering 3-point clamps 

3D measuring head features

• 3D targets are installed on the measuring heads which are
   battery charged on the wall dock for 8 hours of usage

• Measuring heads are connected to a quick release coupling
   system on the vehicle lifter

• Measuring heads are lightweight and maintenance free

• LCD display on heads for primary information

• 5MP resolution display, remote control function, weight 3kg

• Magnets on wall charging station with LED charging indicator

• Compact design with rubber and plastic protection

Product

Ravaglioli Commercial Vehicle Wheel Balancer

Ravaglioli

Product Code: GTL2.120RC

• Quick balancing, with wheel lift to reduce back injuries

• An electro-pneumatic brake holds the wheel in position

• Automatic rotation to the internal unbalance position

• Cones suitable for light trucks up to 281mm

• Complete with cones for trucks (Ø from 202mm – 221mm & 281mm)

• Manufactured in Italy

Product

Wireless Electro-Hydraulic Mobile Column Lift

Ravaglioli

Product Code: RAV307H.4WS

• Wireless 2.4 GHZ communication among columns
• Each column has a lifting capacity of 7,500 kg
• Sets of 4, 6 and 8 columns can be configured 
• Handles tyre diameters from 900mm to 1,200mm with a minimum run diameter of 580mm
• Each column powered by two 12V maintenance free 100A/h gel type batteries

Product

3D Wheel Aligner

Ravaglioli

Product Code: RAVTD3000S.B

• Bluetooth transmission between measuring heads and control unit
• Equipped with tire grabbing 4-point clamps to avoid run out compensation
• Easy Vehicle Selection
• Animated instructions
• 30° Run Out Compensation
• 3DT® Target – extremely light, no electronic components inside, no maintenance required
• Automatic lift level compensation – Can be used on any 4-post or scissor lift

Product

5.5t 2 Post Clear Floor Hoist

Ravaglioli

Product Code: KPH370.55LIKT

• 5.5 tonne lifting capacity
• Four long 3-stage arms
• Distance between columns of 2800mm
• Hoist height of 4950mm
• Hoist width of 3540mm
• Maximum lifting height of 2040mm
• Minimum lifting height of 125mm
• Safety valve prevents overloading
• Perfect synchronisation between carriages
• Asymmetric lifting of long wheel base vans

Product

3000.SP Plus 3D Wheel Aligner

Ravaglioli

Product Code: RAVTD3000.SP

• Exclusive 3D targets: - extremely light - no electronic components inside - no maintenance required
• Data bank with more than 90,000 vehicle data sheets
• Equipped with tyre grabbing 4 point clamps to avoid run out compensation - Extremely fast
• Can be used on any 4 post or scissors lift and has automatic lift level compensation
• Price excludes installation

Product

3D Wheel Aligner

Ravaglioli

Product Code: RAVTD3000HP.B

• 3DT® Target – extremely light, no electronic components inside and maintenance free
• Automatic lift level compensation – can be used on any 4-post or scissor lifts
• Bluetooth transmission between measuring heads and control unit
• Battery powered for fixed or mobile installation
• Equipped with tyre grabbing 3-point clamps to avoid run out compensation
• Remote control located on each sensor

Product

25t Commercial Vehicle Lift

Ravaglioli

Product Code: RAV825.10

• 25t lifting capacity
• Long platform length of 10m
• No cross rails or torsion bars between lifting platforms
• Ribbed anti-slip steel plate platform surface
• Electronic platform synchronisation, independant of load distribution
• Control valves check lowering speed
• Safety valves activate when overload detected
• Mechanical locking - automatic engagement & pneumatic release
• All pivot points include self lubricating bushings
• Can be supplied for recessed installation

Also available 35t with runway lengths of 6, 8, 9, & 10 metres.

Product

3.2t 2-Post Electro-Mechanical Clear Floor Hoist

Ravaglioli

Product Code: KPX337WK

• Short arms with longer reach, recommended to lift off-road vehicles
• Double thread pads with a minimum height of 95mm only KPX337WR 4.2t Electro-Hydraulic Clear Floor Hoist, double thread pads with a minimum height of 80mm & extra low profi le arms, parallel to the floor
• Extra low profi le arms, parallel to the floor

Product

5.0T 4-Post Electro-Hydraulic Hoist

Ravaglioli

Product Code: RAV4501L

• Long 5,700mm platform with adjustable width
• Automatic mechanical backup safety devices with pneumatic release
• Automatic anti toe trap alarm during final stages of lift descent
• Mechanical, electrical and hydraulic safety devices in compliance with the prevailing standard for CE marking

RAV4502L Extra-long platforms for total wheel alignment with front turning plates locations and rear slip plates

Product

Set of 4 x 5,500kg Mobile Column Lifts - Adjustable Forks

Ravaglioli

Product Code: RAV232NL-AF

• Set of four 5.5t columns
• Large and solid base for maximum stability under load
• Lifting spindles in rolled steel with bronze main nut and safety nut
• Master column with a main control panel and slave column with a secondary control panel and emergency stop button
• New wireless models now available
• Adjustable Forks

Product

3.2t Electro-Mechanical Clear Floor Hoist

Ravaglioli

Product Code: KPX337LWR

• CE approved lift with low voltage controls
• Automatic and permanent nut lubrication system to guarantee efficient lubrication during lifting and descent
• Main nut made of bronze (no plastic) with high resistance to wear, for greater safety
• Arms suitable for quick drop-in extensions
• Extra low profile arms, parallel to the floor
• Double thread pads with a min. height of 80 mm only

Product

Electronic Wheel Balancer with Microprocessor

Ravaglioli

Product Code: G3.140R

• 24 volt motor with low speed rotation
• 19” colour monitor - industrial PC
• 3 Automatic ALU S programs
• Rim diameter 10” - 26”
• Rim width 1.5” - 22”
• Maximum wheel weight 70kg
• Read-out accuracy 1g
• Power supply 110-230V/50-60/1ph

Product

Combined Truck & Car Wheel Aligner

Ravaglioli

Product Code: RAVTD8060TWSR / VARCOMBORAV

• Ravaglioli Truck & Car Wheel Aligner with cabinet, computer, printer, monitor, keyboard complete with car & truck database.
• Includes two pairs of STDA30E standard truck wheel clamps, two pairs of STDA95E 3-point car wheel clamps, one pair of STDA29L commercial turntables, one pair of S110A7 car turntables, 2 front measuring heads for trucks, 2 front measuring heads for cars, 2 rear measuring heads for cars & trucks and a modified cabinet to accept 6 measuring heads.

Note: The VARCOMBORAV option cannot be sold separately & must be ordered with the truck wheel aligner RAVTD8060TWSR and cannot be ordered at a later date to convert an existing truck aligner to perform car alignments

Product

14.0t Electro-mechanical 4 Post Vehicle Hoist

Ravaglioli

Product Code: KP442NE

• Maximum access to the vehicle is provided due to the unique feature of extended platforms
• A safety micro-switch is activated after main nut failure and the electro-mechanical safety system ensures perfect horizontal lifting of the platforms and a balanced load on the motors regardless of vehicle position
• Ideal for transport companies, fleet owners, government authorities, mine site and contractor workshops
• Other larger and smaller 4 post commercial vehicle hoists available upon request

Product

Commercial Vehicle Tyre Changer

Ravaglioli

Product Code: G96N

• Tyre-changer for commercial vehicle wheels from 11” to 27”
• In order to avoid any damage to the rim, the hydraulic pressure of the rim clamping chuck is adjustable 
• The operating dimensions of the rim clamping unit and of the head tool carriage allow the tyre changer to operate on a whole range of wheels, including super-single

Product

RAV 4 Post Mobile Lift, 5.5T Per Column, Hoist

Ravaglioli

Product Code: RAV232NL

• Set of four 5.5t columns 
• Large and solid base for maximum stability under load
• Lifting spindles in rolled steel with bronze main nut and safety nut
• Master column with a main control panel and slave column with a secondary control panel and emergency stop button
• New wireless models now available

Product

4.0t 4-Post Wheel Alignment Hoist

Ravaglioli

Product Code: RAV4402

• Lifting capacity of 4 tonne
• Adjustable platforms to accommodate different vehicle widths optimises access to the underside of a vehicle
• Automatic mechanical back up safety devices with pneumatic release allow for stationary operation with loaded cables
• Immediately triggered safety stud devices operate in the event of a cable slackening or failing
• An automatic anti-toe trapping alarm during the final stages of vehicle hoist descent supplied standard
• Mechanical, electrical and hydraulic safety devices all in compliance with Australian and CE Safety Standards
• Includes rear slip plates and wheel alignment turntable recesses

Product

RAV 6 Post Mobile Lift, 7T Per Column, Hoist

Ravaglioli

Product Code: RAV244

PLC programmable controller with self-diagnostic system ensures synchronisation of all columns
Several operating modes possible
Thermal protection against overload of motors
Low voltage controls (24V) on all columns, dead-man push buttons and safety interlock
Lifting spindles in rolled steel with bronze main nut and safety nut
Master column with a main control panel and slave column with a secondary control panel and emergency stop button combine to effect the vehicleÕs lifting and descent
Indoor and outdoor, 6 to 8 columns and higher capacity per column models all available
Hydraulic towing jack available on request
Manufactured in Italy, compliant to strict CE standards
Approved here to Australian standards by Worksafe

Product

3.2t Mid Rise Scissor Lift

Ravaglioli

Product Code: RAV1450N

• The ideal lift for servicing tyres, brakes, suspension and bodywork
• Low voltage controls (24V); 2.6kW motor and 85psi (6bar) air pressure
• All pivot points fitted with self lubricating bushings for long life
• This lift of the latest generation has the following features: electro-hydraulic operation, high loading capacity and elevated lifting height, rapid cycle times
• A mechanical levelling system assures constantly level lifting platforms regardless of weight distribution

Product

6.5t 4-Post Electro-Hydraulic Commercial Vehicle Hoist FLAT RUNWAYS

Ravaglioli

Product Code: RAV4651L

• 6.5 tonne lifting capacity
• Large clearances between the posts enable easy loading of wide vehicles
• Ideal capacity for larger type vans and medium size trucks
• Main hydraulic cylinder is located inside the fixed platform providing it with maximum protection
• High resistance, galvanised and pre-stretched metal cables
• Large diameter pulleys with self-lubricating and maintenance free bushes
• Ideally suited for use in mine site, council, contractor and truck workshops

Product

Set of 4 x 5.500kg Wireless Mobile Column Lifts

Ravaglioli

Product Code: RAV305H.4WS

• Wireless 2.4 GHZ communication among columns
• Each column has a lifting capacity of 5,500 kg
• Sets of 4, 6 and 8 columns can be configured
• Handles tyre diameters from 900mm to 1,200mm with a minimum run diameter of 580mm
• Each column powered by two 12V maintenance free 55A/h gel type batteries

Product

RAV 4.2t Electro-Hydraulic Clear Floor Hoist

Ravaglioli

Product Code: KPH370.42

• 4.2 tonne lifting capacity
• 2-stage short arms and 3-stage long arms
• Double lifting cylinders - one per column
• Superior lifting height of over 2m
• Cross beam height of 4,175mm
• Safety valve prevents overloading
• Self-controlled lowering speed
• Automatic locking and unlocking
• Minimum Pad Height 95mm
• Minimum Building Height Requirement 4,200mm
• Switch is directly connected to the motor, therefore no transformers, no connectors and no thermo-magnetic switches
• Fully complies with Australian standards
• Perfect synchronisation between cylinders regardless of weight distribution
• Equipped with a safety valve to prevent overloading in case the hydraulic hose bursts
• Arm locking devices engage automatically ensuring vehicle stability

Product

RAV Scissor Lift, 3T, Electro-Hydraulic, Inground, Hoist

Ravaglioli

Product Code: RAV518NLI

• RAV made in ItalyIn ground electro-hydraulic model with a lifting capacity of 3T
• Ideal for space saving in small, medium or large workshops
• No cross rails or torsion bars between the lifting platforms ensures clear access to the underside of the vehicle
• A patented synchronisation device in the hydraulic system assures equal lifting platform height regardless of vehicle weight distribution
• Controlled speed during the initial lifting and final lowering phase of the hoist supplied standard
• All pivot points manufactured with lubricating bushes ensure a long service life
• Manufactured in Italy, with mechanical, electrical and hydraulic safety devices all in compliance with • Australian and CE Safety StandardsMotor: 2.6kwWeight: 720kg

Product

3.0t Electro-hydraulic Full Rise Scissor Lift

Ravaglioli

Product Code: RAV518NL

• Ideal for space saving in small, medium or large workshops
• Minimum height 95mm
• No cross rails or torsion bars between the lifting platforms ensures clear access to the underside of the vehicle
• Controlled speed during the initial lifting and final lowering phase of the hoist supplied standard

Product

4.2t 2-Post Electro-Mechanical Clear Floor Hoist

Ravaglioli

Product Code: KPN349WEK

• Lifting capacity of up to 4,200kg
• Superior lifting height of 2,020mm
• 3-stage short arms and 2-stage long arms
• Width between columns of 2,650mm
• Overall hoist height of 3,873mm and overall hoist width of 3,420mm

Product

5.5t 2-Post Clear Floor Hoist

Ravaglioli

Product Code: KPH370.55LIK

• 5.5 tonne lifting capacity
• Distance between columns of 2,800mm
• Hoist height of 4,950mm
• Hoist width of 3,340mm
• Maximum lifting height of 2,040mm
KPH370.55LIKT Model equipped for extra long vans, distance between columns of 3,000mm

Product

Set of 4 x 8,500Kg Wireless Mobile Column Lifts

Ravaglioli

Product Code: RAV308H.4WS

• Wireless 2.4 GHZ communication among columns
• Each column has a lifting capacity of 8,500 kg
• Sets of 4, 6 and 8 columns can be configured
• Handles tyre diameters from 900mm to 1,200mm with a minimum run diameter of 580mm
• Each column powered by two 12V maintenance free 100A/h gel type batteries
Also available: RAV308H.6WS – as above but as a set of 6

Product

Leverless Tyre Changer - RFT & HP tyres with added helper arm

Ravaglioli

Product Code: G8645IV.26

• The bead breaker opening can be adjusted to work with extreme rapidity
• Chucking table with adjustable positioning of the clamps from 10” - 26” (External clamping)
• Optional helper arm

Product

5.5t 2-Post Electro Mechanical Clear Floor Hoist

Ravaglioli

Product Code: KPN250LIKT

• Four long three stage arms enable the hoist to lift long wheel base vans and standard cars
• The arms’ extensions slide on spring-mounted rollers, allowing easy use and a steady load
• Minimum pad height of 120mm for the asymmetric lifting of safety vehicles
• Maximum lift height of 1,995mm
• Automatic and permanent nut lubrication system guarantees efficient lubrication during hose hoist lift and descent
• Forged brass shaft assures corrosion free and leak proof operation
• A specially treated spring provides long  life and trouble free operation
• Electro-mechanical design guarantees a long service life, minimal maintenance and maximum workplace safety

Product

RAV 4 Post, 12T Electro-Hydraulic Hoist

Ravaglioli

Product Code: KP442E

RAV made in Italy
For truck, buses & large industrial vehicles
3 phase motors 4 x 2
Capacity: 12T
Standard platform length: 8 metres
Weight: 3070kg
Manufactured in Italy, compliant to strict CE standards
Approved here to Australian standards by Worksafe

Product

4.0t Electro-Hydraulic Full Rise Scissor Lift

Ravaglioli

Product Code: RAV540

• No cross rails between the lifting platforms ensures clear under vehicle access
• Equal lifting platform height regardless of vehicle weight distribution
• Minimum height 135mm
• Controlled speed during initial lifting and final lowering phase
• High capacity model with longer extendable platform for longer vehicle

Product

40t Set of 4 10t Electro-Mechanical Mobile Column Lift

Ravaglioli

Product Code: RAV271

• 4 x 10t wireless column lifts, 40t lifting capacity
• Automatic spindle lubrication during movements
• Large and solid base for maximum stability under load
• Lifting spindles in rolled steel with bronze main and safety nuts
• Guarantee balanced lifting position at any position
• All control panels fitted with emergency stop button
• Also available: 6 and 8 column versions

Product

8.0t 4-Post Electro-Hydraulic Commercial Vehicle Hoist

Ravaglioli

Product Code: RAV4800

• Hydraulic cylinder is perfectly protected inside the fixed platform
• High resistance, galvanized and pre-stretched metal cables
• Large diameter pulleys with self-lubricating and maintenance free bushes
• Adjustable platform to accommodate different vehicle tracks and optimised access to vehicle underside
• Automatic mechanical back-up safety devices (every 100mm) with pneumatic release allowing stationary operation with unladen cables
• Mechanical, electrical and hydraulic safety devices in compliance with the CE standard

Product

Commercial Vehicle Tyre Changer

Ravaglioli

Product Code: GRS926

• Truck Tyre Changer for both road-side and workshop service, suitable for closed vans and/or small workshops
• Controls on console
• Hydraulic chucking table
• Hydraulic Up -Down Movement
• Minimum Height of 13” (330 mm)
• Minimum Clamping diameter 4” (90 mm)
• Suitable also for agricultural tyres

Product

3D Wheel Aligner

Ravaglioli

Product Code: RAVTD3000HPR.B

• 3DT® Target – extremely light, no electronic components inside and maintenance free
• Automatic lift level compensation – can be used on any 4-post or scissor lifts
• Bluetooth transmission between measuring heads and control unit
• Battery powered for fixed or mobile installation with an extra set of batteries
• Equipped with tyre grabbing 3-point clamps to avoid run out compensation
• Now comes with mouse & mouse pad
• Spirit levels now on the targets
• Adjustments can be made with no need to see the monitor with LEDs on side of measuring heads
• Wi-Fi dongle
• ADAS ready
• Alignment connect ready for smartphone or tablet
• 2 years free data updates

Product

Set of 4 x 7,000kg Mobile Column Lifts

Ravaglioli

Product Code: RAV241

• Automatic spindle lubrication during movements
• Large and solid base for maximum stability under load
• Lifting spindles in rolled steel with bronze main & safety nuts
• Guarantee balanced lifting position at any position
• All control panels fitted with emergency stop button
• Mechanical towing jacks to each column
• Also available: 6 and 8 column versions
Only 2 shown in image

Product

Jacking Beam - RAV, 13.5T, Air/Hydraulic

Ravaglioli

Product Code: KP118NP

• Rav Italian made Twin-piston air/hydraulic wheel-free jack
• Suitable for KP440NE and KP442NE Pneumatic version
• Pneumatic feed pressure 6 Ö10 bar
• Italian made and quality13.5T capacityLifting height: 302mmRoller translationManual version also available KP118Pit version also available KP118P

Product

Set of 4 x 8,500kg Electro-Mechanical Mobile Column Lift

Ravaglioli

Product Code: RAV261

• Automatic spindle lubrication during movements
• Lifting spindles in rolled steel with bronze main & safety nuts
• Guarantee balanced lifting position at any position
• All control panels fitted with emergency stop button
• Mechanical towing jacks to each column

Product

Total Drive Wheel Aligner

Ravaglioli

Product Code: RAVTD5080WS

• Equipped with a lap top which can be placed anywhere in the workshop
• Allows maximum freedom when using the aligner
• Data management and display program in Windows environment
• Data bank with more than 90,000 vehicle data sheets
• Customer data bank for recording 20,000 jobs with search by customer name or vehicle registration

Product

IT-A Leverless Tyre Changer

Ravaglioli

Product Code: G1500.3IT-A

• Patented lever-free tool facilitates effortless, completely leverless operation
• Features a patented top inflation device
• User-friendly console simplifies the operator’s learning process
• The console houses buttons for operating the rollers and tools
• 3 working modes: Standard - Automatic - PC managed
• Patented lever-free tool facilitates effortless, completely leverless operation
• Features a patented top inflation device
• User-friendly console simplifies the operator’s learning process
• The console houses buttons for operating the rollers and tools
• 3 working modes: Standard - Automatic - PC managed

Product

8.5t Commercial Vehicle 6-Post Column Hoist

Ravaglioli

Product Code: RAV263

• Electro-hydraulic lift with screws lubricated by felt pads
• Ertalon runners (10 per carriage) with low friction 
• Simultaneous operation of all columns
• Lifting capacity of 8.5 tonnes per column
• 4 column model also available

Product

24t Electro-mechanical Truck and Bus Hoist

Ravaglioli

Product Code: KP440NE

• Lifting capacity of 24,000kg
• 8m standard platform length suitable for trucks, buses & large industrial vehicles
• Lifting height of 1,610mm 
• Post height of 1,970mm 
• 3 phase motors 
• Manufactured in Italy, compliant to strict CE standards and approved to Australian standards

Product

Tyre Changer Rav - Automatic,Tilt Arm 2 Position

Ravaglioli

Product Code: G7645I.26

Rav Italian made fully automatic tyre changer complete with tilt back and with 2 vertical arm positions suitable for cars, motorbikes and light commercials
Complete with under table inflation. Clamping capacity Ext 26" / Int 26.5"
The frame is large and reinforced to give the utmost rigidity to the structure
and chucking table. The gear box is installed between two steel plates, to avoid flexing during operation
The extra height of the vertical post and tool shaft allow operation on tyres to a maximum of 17" (431mm) width
The bead breaker opening can be adjusted to work with extreme rapidity
With tubeless tyre inflation system. The device is activated by a single pedal command with two positions. Jointed and shaped blade to facilitate bead breaking; Galvanised cylinder with double operation
Invemotor bead-breaker adaptor with tilting adjustment; Single speed
Motor: 3 phase 230/400V 50 Hz 0.75kW Chuck rotation speed: 7.3 rpm
Max torque to chuck: 1200nm Self-centring lock external: 10-26" Self-centring lock internal: 12-28.5" Tool working span: 8-32" Max tyre diameter: 1143mm)
3 PH single speed

Product

2t Manual Jacking Beam

Ravaglioli

Product Code: J20PNX

• RAV Italian made jacking beam for the RAV4401 & RAV4402 4 t 
• 4 post lifts
• Pneumatic version Pneumatic feed pressure 6psi 10 bar
• 2T capacity
• Great lifting height: 355mm
• Automatic engagement & pneumatic-release mechanical lock device
• Two-hand "dead-man" lowering control
• J20NX manual version also available

Product

5T 4 Post Wheel Alignment Hoist OPEN FRONT

Ravaglioli

Product Code: RAV4506OF

• Extra-long platforms for total wheel alignment with front turning plates locations and rear slip plates
• Hydraulic cylinder is located inside the fixed platform and thus perfectly protected
• High-resistant, galvanised and pre-stretched metal cables
• Large-diameter pulleys with self-lubricating and maintenance free bushes
• Adjustable platform to accommodate different vehicle tracks
• Automatic mechanical back-up safety devices (every 100 mm) with pneumatic release allowing stationary operation with unladen cables
• Immediate-triggering safety stud devices in case a cable slackens or fails
• Automatic anti-toe trap alarm during final stages of hoist descent
• Mechanical, electrical and hydraulic safety devices (CE marking)
• Extra-long platforms for total wheel alignment, with front turning plates locations and rear slip plates

Product

Total Drive Bluetooth Wheel Aligner

Ravaglioli

Product Code: RAVTD1780WS

• Data Bluetooth transmission allows maximum mobility between different working positions
• Includes a pair of 3 point clamps, with quick locking units and ABS claws (STDA35E)
• A special Spoiler program is automatically activated, through a simplified practical procedure, to perform the measurements on sport and tuned car bodies

Product

56” Commercial Vehicle Tyre Changer with Bluetooth Control Console

Ravaglioli

Product Code: G10156.15

Tyre changers specifically designed for farming equipment with rims up to 56” with bluetooth console
• Stand-by function - after 5 seconds. the machine has not been used, the motor turns off
• Wireless control unit
• Hydraulic controls on aerial arm. Manual movement, lifting and rotational of tool
• Can be used on 22.5” truck tyres

Product

Wheel Balancer Rav-Elec, Auto Data, Entry Level

Ravaglioli

Product Code: G2.124H

Rav Italian made 240v model suitable for passenger cars & light commercial vehicles
Automatic spin when cover is lowered
The arm with weight pliers is designed for accurate and easy positioning of the weights on alloy rims and it stores the predetermined positions for balancing
correction
Guided rim/tyre optimisation process
Equipped with pedal brake to keep the wheel stopped during weight positioning and fitting of accessories
Distance and diameter up to 30" automatically retrieved through digital caliper and optical sensor
Automatic stop in the external unbalanced position
Automatic programs available for ALUS and PAX wheels
Rim diameter: 10-30" Rim width: 1.5-22" Maximum wheel weight: 65kg
Read out accuracy: 1g Cycle time: 6 sec Rotation speed: 100rpm

Product

8CCD Wheel Aligner with Bluetooth

Ravaglioli

Product Code: RAVTD8080TWSR

• Bluetooth transmission between front heads and cabinet
• Infrared transmission between sensor heads
• Double inclinometer to allow caster adjustment without steering
• Ability to operate the system from any head
• Data management and display program in Windows environment
• Data bank with vehicle data sheets already entered
• Customer data bank for recording jobs with search by customer name or vehicle plate number

Product

Commercial Vehicle Wheel Hydraulic Lift

Ravaglioli

Product Code: SR16N

• Ravaglioli Commercial Vehicle Wheel Hydraulic Lift - Single or Twin Wheels

Product

Set of 6 x 8,500Kg Wireless Mobile Column Lifts

Ravaglioli

Product Code: RAV308H.6WS

• Wireless 2.4 GHZ communication among columns
• Each column has a lifting capacity of 8,500 kg
• Sets of 4, 6 and 8 columns can be configured
• Handles tyre diameters from 900mm to 1,200mm with a minimum run diameter of 580mm
• Each column powered by two 12V maintenance free 100A/h gel type batteries

Note: Set of 4 shown in image

Product

3D 3D Wheel Aligner

Ravaglioli

Product Code: RAVTD3000ATS.B

• Extremely fast operation 
• No run-out compensation
• Version equipped with 3-point tyre grabbing clamps to avoid run out compensation
• Can be used on any 4-post hoist or scissor lift, at any working height
• Automatic lift level compensation

• Space saver to maximise available workspace and ultimate convenience:
- No minimum distance required in-front of the lift
- Free console position
- Ideal for extra long wheel base vehicles up to 4.7m wheelbase

Product

Wheel Lift

Ravaglioli

Product Code: GR83

• Very easy to use
• Enables wheels up to 80kg weight to be raised from the floor and placed on wheel balancer or tyre changer with no handling by operator
• Overcomes any health and safety legislation that may exist regarding maximum operator handling capacity

Product

Tyre Test Tank

Ravaglioli

Product Code: G16N

• Ravaglioli  tyre test tank for inner tubes and tubeless tyres up to 680mm
• Air operated
• Test tank for inner tubes or tubeless tyres up to 680 mm diameter and 260 mm width
• Air operated: equipped with control to lift and lower the tyre-support basket
• Cataphoresis and enamel paint
• Air pressure 6-8 bars
• Dimensions 920x920x1800mm
• Weight 68 kg

Product

Electronic Wheel Balancer with Microprocessor

Ravaglioli

Product Code: G7.340SCAN

• Laser scanner and pointer
• Wheel dimension sonar
• Laser pointer and touch screen
• Hedden weight and spoke count feature
• Automatic wheel weight position memory

Product

Truck 4CCD Wheel Aligner

Ravaglioli

Product Code: RAVTD5040TWS

Ravaglioli 4CCD wheel aligner with bluetooth communication for commercial vehicles with standard 4 point wheel clamps comes with laptop

Product

Wheel Balancer Rav-Elec, Entry Level

Ravaglioli

Product Code: G2.117H

Rav Italian made entry level 240v electronic wheel balancer equipped with wheel cover
The particular cover design reduces the overall machine dimensions and allows the balancing of wheels up to 1.016 mm (40") in diameter, with the
cover closed
Manual Data Entry and Low Rotation Speed
Features backlit graphic LCD display and multifunction interactive keys
Hidden weight mode allows weights to be hidden behind spokes
Static mode ideal for motorbikes
Guided ALU S programme
Guided rim/tyre optimisation process
Rim diameter: 10" - 30" Rim width: 1.5" - 22" Maximum wheel weight: 65kg Read-out accuracy: 1g Cycle time: 7 seconds Rotation speed: < 100

Product

Wheel Lift for Wheel Balancers

Ravaglioli

Product Code: GAR325

Product

Automatic 34”Lever-less Tyre Changer

Ravaglioli

Product Code: G1150.30-MAGIC-IT-A

• Lever-less tyre changer with wheel lift - specifically designed for run flat and low profile tyres up to 30”
• Develops grease pressures up to 12,000psi (828bar)
• Can operate on both normal and reverse rims
• Specially designed tool operates between rim and bead pulling the bead with minimum stress
• This model comes with 3 position extendable base - form 10-26” up to 14-30”

• Including the following accessories:
G1000A80/S - Quick fit locking,
PLUS93 - Helper arm
G1000A112 - Pneumatic wheel lifter
G1000A67 - Magic cord

GAR171 / GAR172 / GAR173 Truck Adaptor
GAR171 (3 x 170, 186, 205, 222, 245)
GAR172 (4 x 275, 285)
GAR173 (5 x 225, 286, 335)

Product

Wheel Balancer Rav - Electronic, Entry Level

Ravaglioli

Product Code: G2.119H

Rav Italian made 240v model suitable for passenger cars & light commercial vehicles
A low rotation speed balancer
Entry level model of the motorised range, the machine offers great value for
money and occupies a very limited space, it also gives professional like performance
Complete with wheel cover
Backlit graphic LCD display, 132x40 mm
Multifunction and interactive keys to guide the operator

Product

RAV 5t Pneumatic Jacking beam

Ravaglioli

Product Code: J50PHA

RAV 5t Pneumatic Jacking beam

Product

2t Manual Jacking Beam

Ravaglioli

Product Code: J17X

• 2,000kg capacity, hydraulic hand-pump scissor type with extendable lifting arms 
• Suitable for: hydraulic 4-post hoists & scissor lifts:
• Operated by means of hand-pump
• Translation device on elastic rollers
• Automatically-engaging and hand-released mechanical lock device
• Two-hand “deadman” lowering control

Product

Wheel Balancer Rav - Truck, Automatic

Ravaglioli

Product Code: GTL2.120HC

Rav Italian made 240v model suitable for trucks
Microprocessor controlled with Self-Calibration and Self-Diagnostics
Complete with cones for trucks (¯ from 202 to 221mm and 281mm)
Complete with pneumatic lifting wheel platform
Guided balancing procedure
Interactive inputs with multifunction keys: the functions related to each key
vary according to use and are identified on the display by graphic icons for
immediate understanding
Backlit graphic LCD display 132 x 40mm
Rim diameter: 10-30" Rim width: 1.5-22" Maximum wheel weight: 200kg
Read out accuracy: 5g (truck), 1g (car)
Rotation speed: 80rpm (truck), 100rpm (car)

Product

Wheel Balancer Rav-Pnuematic, Prof Level

Ravaglioli

Product Code: GP2.124H

Rav Italian made 240v model suitable for passenger cars & light commercial vehicles. Automatic spin when cover is lowered
The arm with weight pliers is designed for accurate and easy positioning of the weights on alloy rims and it stores the predetermined positions for balancing
correction. Guided rim/tyre optimisation process GAR213
Equipped with pedal brake to keep the wheel stopped during weight positioning and fitting of accessories
Distance and diameter up to 30" automatically retrieved through digital caliper and optical sensor. Automatic stop in the external unbalanced position
Automatic programs available for ALUS and PAX wheels
Rim diameter: 10-30" Rim width: 1.5-22" Maximum wheel weight: 65kg
Read out accuracy: 1g Cycle time: 6 sec Rotation speed: 100rpm
Backlit monochrome graphic LCD display, 1/16 VGA
Version with air locking. Lifting up the pedal, the wheel is automatically locked in an extremely precise way, thanks to the locking device with constant pressure and high stroke. The pneumatic lock makes the balancing process quicker and reduces the operator physical stress, increasing the quantity of balanced

Product

3t Manual Jacking Beam

Ravaglioli

Product Code: J30X

• 3,000kg capacity, hydraulic hand-pump scissor type with extendable lifting arms
• Suitable for: hydraulic 4-post hoists & scissor lifts
• Operated by means of hand-pump
• Translation device on elastic rollers
• Automatically-engaging and hand-released mechanical lock device
• Two-hand “deadman” lowering control

Product

2t Pneumatic Jacking beam

Ravaglioli

Product Code: J25PX

Product

RAV 3t Pneumatic Jacking beam

Ravaglioli

Product Code: J30PX

RAV 3t Pneumatic Jacking beam

Product

Wheel Balancer

Ravaglioli

Product Code: G4.140R

• Professional machines, offering all the features requested by the most demanding operators
• Fast and accurate selection using internal data gauge, with software guided balancing program
• Maximum precision granted by the automatic measurement of distance and diameter and by the automatic ALU S and PAX programmes
• Easy operation thanks to interactive inputs, which guide the operator during all the phases of the balancing process
• Colour TFT SVGA 19" monitor Ð Industrial PC with static hard disk 3D Graphic

Product

5t Manual Jacking Beam

Ravaglioli

Product Code: J50HA

• 5,000kg capacity, hydraulic hand-pump scissor type with extendable lifting arms 
• Suitable for: hydraulic 4-post hoists & scissor lifts:
• Operated by means of hand-pump
• Translation device on elastic rollers
• Automatically-engaging and hand-released mechanical lock device
• Two-hand “deadman” lowering control

Product

4.5t 2 Post Electro-Hydraulic Clear Floor Hoist

Ravaglioli

Product Code: KPH350.45

• Capacity 4500 kg 

• Max. lifting height 1863 mm (1928 mm with extensions) 

• Lifting time 54 seconds 

• Min. pad height 100 mm 

• Max. pad height 136 mm 

• Column distance (internal) 2916 mm 

• Drive-through width 2659 mm 

• Max. usable height 3850 mm 

• Surface coating powder coated 

• Arm layout asymmetrical 

• Telescopic front arms 3 stages 

• Telescopic rear arms 2 stages 

• Min. front arm length 611 mm 

• Max. front arm length 1131 mm 

• Min. rear arm length 802 mm 

• Max. rear arm length 1235 mm 

• Width 3486 mm 

• Height 4000 mm 

• Driving power 2.2 kW 

• Weight 750 kg 

Product

At Your Service

Alemlube

Product Code: Alemlube

With experienced teams of vehicle hoist technicians, Alemlube can provide you with all your vehicle hoist installation and service needs. We can assist with all brands of vehicle hoists here in Australia with access to spare parts and any technical requirement.

As the exclusive distributor in Australia of the Ravaglioli range of vehicle hoists, Alemlube is one of the only companies to have support for its own product range with its own technicians. Other companies in this field are reliant on external contractors.

The Alemlube 26-point Hoist Inspection Certificate, as shown here, is provided for your records on the completion of each service (an OH&S requirement), and a sticker will be affixed to your vehicle hoist as a reminder of the next service due date.

Alemlube’s annual service schedule will record your servicing to ensure that all your vehicle hoist servicing requirements are met.

No vehicle hoist installation or servicing job is too large or too small, and with a comprehensive stock of spare parts you can be confident of expert backup to keep your hoists in peak operating condition.

To ensure that your workshop equipment is kept in peak operating condition, Alemlube will DOUBLE THE WARRANTY when equipment is installed & serviced by Alemlube technicians 

Product

Trade Show Tablet and Counter Displays

Alemlube

Product Code: ATSTD0617, AATSTD0617, RTSTD0617

The unique Alemlube Tablet Displays have been designed and manufactured to showcase specific Alemlube product information at Trade Shows, Field Days and Exhibitions.
Three individually branded designs are dedicated to represent Alemlube General Range products, the Alemlube Automotive workshop equipment range and the Italian made Ravaglioli workshop equipment range.

1 x ATSTD0617 Alemlube Trade Show Tablet Display
1 x AATSTD0617 Alemlube Automotive Trade Show Tablet Display
1 x RTSTD0617 Ravaglioli Trade Show Tablet Display