Product Code: AA454PA
Product Code: AA404PA-WF
• 4 post hoist designed for precise wheel alignment procedures and general under vehicle service operations
• Heavy duty lifting capacity of 4,000kg
• Integrated 2 tonne Jacking beams x 2
• Overall length of 5,704mm
• Platform Length of 4,610mm
• Integrated rear wheel slip-plates
• Turntable recesses with cover plates
• Maximum lifting height of hoist 1,800mm with Jacking beam 510mm
• Minimum lowered height of 225mm with Jacking beam 190mm
• Lifting Speed: Main Hoist: 50sec, Jacking beam: 8sec
• Lowering Speed: Main Hoist: 35sec, Jacking beam 5-15sec
• Wired remote control for hoist and Jacking beams
• Economical 3 phase power
• Compliant with Australian Standards
• Total weight 1,600kg
Product Code: RAV4402
Product Code: RAV4652L
Product Code: RAV4502L
• Extra-long platforms for total wheel alignment with front turning plates locations and rear slip plates
• Hydraulic cylinder is located inside the fixed platform and thus perfectly protected
• High resistant, galvanised and pre-stretched metal cables
• Automatic mechanical back-up safety devices (every 100mm) with pneumatic release allowing stationary operation with unladen cables
• Manufactured in Italy
Product Code: RAV4802
Product Code: RAV4506OF
• Extra-long platforms for total wheel alignment with front turning plates locations and rear slip plates
• Hydraulic cylinder is located inside the fixed platform and thus perfectly protected
• High-resistant, galvanised and pre-stretched metal cables
• Large-diameter pulleys with self-lubricating and maintenance free bushes
• Adjustable platform to accommodate different vehicle tracks
• Automatic mechanical back-up safety devices (every 100 mm) with pneumatic release allowing stationary operation with unladen cables
• Immediate-triggering safety stud devices in case a cable slackens or fails
• Automatic anti-toe trap alarm during final stages of hoist descent
• Mechanical, electrical and hydraulic safety devices (CE marking)
• Extra-long platforms for total wheel alignment, with front turning plates locations and rear slip plates
Product Code: AAP ARGOS
• Measuring in a blink - Measure toe and camber in less than 5 seconds
• Measuring process automatically starts at the arrival of the vehicle
• Instant touchless measurement without exiting the vehicle
• No manual adjustments for cars with different wheelbases
• No clamps, targets or sensors
• Rim run-out not compulsory
• No need to remove hubcaps
• No brake pedal required to measure caster
• Automatic locking & unlocking turntables
• Remote vehicle specs selection
• No obstructions around lift or wheels
• No moving parts, no bulky cabinet
• Automatic pre-selection of vehicles’ specifications
• Remote software control & measurements visualisation
• Fitting to every type of lift or pit for touchless wheel alignment.
• Camera support for the positioning of vehicles on the turntables
• Eliminate any effort and time for aligner’s measurements
• Thorough check all your customers’ vehicles
• Find out more vehicles that need adjustments
• Increase turnover and customers’ satisfaction
• Manufactured in Italy
Product Code: RAV640.2I
Product Code: RAV3D2.0WALL3S
Space Saving Wheel Alignment
• Wall mounted wheel alignment system saving space using a wall
mounted tablet, wall mounted 3D measuring heads and clamps
• 2 compact and lightweight 3D measuring heads
• PC free Bluetooth enabled lightweight tablet with adhesive
magnets for wall mounting
• Set of four wall mounted self-centering 3-point clamps
3D measuring head features
• 3D targets are installed on the measuring heads which are
battery charged on the wall dock for 8 hours of usage
• Measuring heads are connected to a quick release coupling
system on the vehicle lifter
• Measuring heads are lightweight and maintenance free
• LCD display on heads for primary information
• 5MP resolution display, remote control function, weight 3kg
• Magnets on wall charging station with LED charging indicator
• Compact design with rubber and plastic protection
Product Code: Alemlube
The Ultimate Modern Automotive Workshop
The completed layout plan is effectively a working drawing to hand over to the builder, electrician, plumber etc. The plan indicates to you exactly what Alemlube will be proposing in a tender for the service workshop fitout.
Alemlube is instrumental in achieving a state of the art service facility, literally from start to finish and continues to provide ongoing equipment requirements and maintenance support to workshops throughout Australia and New Zealand.
The vision and objective is to create a clean, practical and efficient workshop with minimal unnecessary obstruction.
A key objective may be to conceal all pipework underground rather than a network travelling on walls and suspended from ceiling brackets.
Following extensive consultation with management, the Alemlube team set about designing workshop layouts, reticulation grids and fluid storage requirements with a view to maximise available space that result in a practical, functional and efficient working environment, clearly outlined in a specific brief.
Equally important is working with architects and project managers focusing on delivering the best possible outcome in line with exacting specifications and requirements. An exercise that Alemlube has undertaken and completed time and time again.
A typical dealership fitout may including the following:
• Fully equipped with 24 vehicles hoists - comprising 4 post,
• 2 post, scissor and wheel alignment models - strategically positioned in three rows with access from two lanes and a central drive through
• Three runs of sliding rail fume extraction systems cover all hoists
• A fully piped fluid reticulation network supplies all workbays with oil, fluids, water, air and incorporates waste oil evacuation lines back to bulk storage tanks installed in the oil store
A multi-purpose workshop is designed to accommodate:
• 5 x Lexus bays, 10 x Toyota bays, 4 x Express bays
• 2 x Detail bays, 1 x Wash bay, 1 x Coaster wash bay
• 1 x Carwash and 7 x Spare bays for future expansion
• Vehicle lifts installed: 22 x 3.5t in-ground piston lifts
• 1 x 6t platform wheel alignment scissor lift
• A fully piped fluid reticulation network supplies all workbays with oil, fluids, water, air and incorporates waste oil evacuation lines back to bulk storage tanks installed in the oil store
Gantry/Workbench/Storage Detail
• Modular workbenches and storage solutions. Options are many, from several ranges available or custom built
• Hose reels can be mounted on gantries or enclosed within workbench cabinets under the bench top
All workshop facilities detailed to accommodate a full range of vehicle hoists including 4 post, 2 post, wheel alignment and inground scissor lifts
• All service work bays access the sliding rail fume extraction system network
• A fully piped fluid reticulation network supplies all work bays with oil, fluids, water, air and incorporates waste oil evacuation lines back to bulk storage tanks installed in the oil store
A compact workshop fitout may include:
• Workshop size is no limitation as evidenced by this plan that accommodates 10 vehicle hoists within fully optioned work bays
• Space saving hose reel gantries supplying air, and oil service workbays from both sides
• Also specified: new & waste oil tanks, ATF & coolant trolleys
Product Code: AAPWA3D
• Compact targets with no electronics and batteries
• Comprehensive wheel alignment software and database
• Large 27" LCD display
• Compact console
• Ergonomic design and easy accessibility during maintenance operations
• WiFi connection for automatic software updates
• Data management & display program in Windows 10
• 4-point clamps 12"-24" with universal grips and targets
• High definition cameras
• Camera support with manual control
• Guided and simple operating procedure
• Premium turntables
• Supplied with two mechanical turntables for cars, brake pedal depressor & steering wheel holder
Product Code: RAV4501L
• Long 5,700mm platform with adjustable width
• Automatic mechanical backup safety devices with pneumatic release
• Automatic anti toe trap alarm during final stages of lift descent
• Mechanical, electrical and hydraulic safety devices in compliance with the prevailing standard for CE marking
RAV4502L Extra-long platforms for total wheel alignment with front turning plates locations and rear slip plates
Product Code: AA45LPAS
