Products and Services

Products and Services

  info@alemlube.co.nz  1300 159 311

Vehicle hoists

Product

3.2t Baseless Screw 2 Post Electro Mechanical Lift

Product Code: KPX32

• Truly asymmetric columns designed to optimise the drive through and footprint

• Internal carriages running on lubricated sliding guides, protected from the external environment, ensures a longer life to the sliding elements

• 3-stage arms with quick fit and telescopic rubber pads

• Equipped with an acoustic anti toe trap system

• Solid automatic arm locking.

• The geometry of the arms has been designed to lift from microcars to long wheel base sedan.

• Max. lifting height 2,000mm

• Lifting time 42 seconds

• Min. pad height 96mm

• Max. pad height 130mm

• Column height 3,223mm

• Drive-through width 2,372-2,472mm

• Min. ceiling standard height 4,025mm

• Adjustable height – suits low roof applications

• Arm layout asymmetrical

• Min. front arm length 555mm

• Max. front arm length 1100mm

• Min. rear arm length 805mm

• Max. rear arm length 1,200mm

• Driving power 2x2.6kW

• Width 3,250-3,350mm

• Height 4,025mm

Product

3.5t Full Rise Low Profile Scissor Lift 240V

Alemlube

Product Code: AA35S-240V

• Lifting capacity of 3,500kg 
• 240V three phase motor 
• 2.2KW aluminium motor 
• Supplied standard with 35mm & 75mm thick rubber blocks 
• Platform size: 1485 x 2105 x 660mm 
• Maximum lifting height of 1930mm 
• Lowered height of 105mm 
• Raising speeds: Up: ≤60 sec. Down ≥40 sec. 
• Automatic lubricating system and oil-less bearings 
• Dual hydraulic locking system 
• Noise: ≤70dB (A) 
• Australian WORKSAFE compliance 

Product

3.5t Full Rise Low Profile Scissor Lift 415V

Alemlube

Product Code: AA35S

• Lifting capacity of 3,500kg
• 415V three phase motor 
• 2.2KW aluminium motor 
• Supplied standard with 35mm & 75mm thick rubber blocks 
• Platform size: 1485 x 2105 x 660mm 
• Maximum lifting height of 1930mm 
• Lowered height of 105mm 
• Raising speeds: Up: ≤60 sec. Down ≥40 sec. 
• Automatic lubricating system and oil-less bearings 
• Dual hydraulic locking system 
• Noise: ≤70dB (A) 
• Australian WORKSAFE compliance 

Product

4.0t 4-Post Wheel Alignment Hoist with Integrated Jacking Beams

Product Code: AA404PA-WF

• 4 post hoist designed for precise wheel alignment procedures and general under vehicle service operations
• Heavy duty lifting capacity of 4,000kg
• Integrated 2 tonne Jacking beams x 2
• Overall length of 5,704mm
• Platform Length of 4,610mm
• Integrated rear wheel slip-plates
• Turntable recesses with cover plates
• Maximum lifting height of hoist 1,800mm with Jacking beam 510mm
• Minimum lowered height of 225mm with Jacking beam 190mm
• Lifting Speed: Main Hoist: 50sec, Jacking beam: 8sec
• Lowering Speed: Main Hoist: 35sec, Jacking beam 5-15sec
• Wired remote control for hoist and Jacking beams
• Economical 3 phase power
• Compliant with Australian Standards
• Total weight 1,600kg

Product

4.5t 2 Post Electro-Hydraulic Clear Floor Hoist

Ravaglioli

Product Code: KPH350.45

• Capacity 4500 kg 

• Max. lifting height 1863 mm (1928 mm with extensions) 

• Lifting time 54 seconds 

• Min. pad height 100 mm 

• Max. pad height 136 mm 

• Column distance (internal) 2916 mm 

• Drive-through width 2659 mm 

• Max. usable height 3850 mm 

• Surface coating powder coated 

• Arm layout asymmetrical 

• Telescopic front arms 3 stages 

• Telescopic rear arms 2 stages 

• Min. front arm length 611 mm 

• Max. front arm length 1131 mm 

• Min. rear arm length 802 mm 

• Max. rear arm length 1235 mm 

• Width 3486 mm 

• Height 4000 mm 

• Driving power 2.2 kW 

• Weight 750 kg 

Product

4.5t 2-Post Electro-Hydraulic Clear Floor Hoist

Product Code: KPH370.45

• Three-stage short arms and two-stage long arms provide asymmetric lifting of vans and off-road vehicles
• Maximum lifting height 4,065mm or 4,165mm
• 3 different extensions height available from 3,625mm to 5,000mm
• Includes top limit switch safety bar, door protectors, 4WD spacers & spacer holders

Product

5.0t 2-Post Electro-Hydraulic Clear Floor Vehicle Hoist

Alemlube

Product Code: AA50CF2PN

• Lifting capacity of 5,000kg
• Lifting height 1,800mm
• Minimum pad height 110mm
• Post height 4,420mm
• Ideal for light commercial vehicles
• Includes 4WD extension

Product

5.5t 2-Post Electro Mechanical Clear Floor Hoist

Ravaglioli

Product Code: KPN250LIKT

• Four long three stage arms enable the hoist to lift long wheel base vans and standard cars
• The arms’ extensions slide on spring-mounted rollers, allowing easy use and a steady load
• Minimum pad height of 120mm for the asymmetric lifting of safety vehicles
• Maximum lift height of 1,995mm
• Automatic and permanent nut lubrication system guarantees efficient lubrication during hose hoist lift and descent
• Forged brass shaft assures corrosion free and leak proof operation
• A specially treated spring provides long  life and trouble free operation
• Electro-mechanical design guarantees a long service life, minimal maintenance and maximum workplace safety

Product

Alemlube Automotive 4.0t Hydraulic 2-Post Clear Floor Vehicle Hoist

Product Code: AA40CF2P

• 4,000kg Lifting capacity
• Includes 4WD extensions
• Maximum lifting height of 1,900mm
• Minimum lowered height of 100mm
• Standard height clearance of 3,900mm 
• Fast lifting time of 60 seconds
• Fast descent time of 18 to 40 seconds
• Distance between columns of 2,760mm
• Drive through width of 2,640mm
• Asymmetric lift arm design incorporating 2 and 3 stage arms with toe protection and automatic engaging safety arm locks
• Large diameter lifting pads comfortably accommodate large & small vehicles
• Electric safety lock operation
• Standard economical 3 phase power with optional 240 volt power pack
• Aluminium motor for improved cooling capacity during high work demands
• Low voltage controls offer greater operator safety
• Quality components throughout
• Australian Worksafe compliance: Design Registration Number: WAH 20951
• Manufactured to stringent European CE Standards
• Also Available AA40CF2P-240V as 240V model
• Also Available AA40CF2PEH - with 1 metre height extension kit

Product

Alemlube Automotive Electro-Hydraulic 2 Post Hoist

Alemlube

Product Code: AA402-240V

• Standard economical 240V power pack
• High lifting capability of 4t
• Fast lifting time of 60 seconds
• Lowering time of between 18 to 40 seconds
• Standard height clearance of 3950mm
• Overall height of 4140mm
• Maximum lifting height of 2000mm
• Minimum lowered height of 110mmn
• Distance between columns of 2880mm
• Asymmetric lift arm design incorporating 2 and 3 stage arms with automatic engaging safety arm locks
• Large diameter screw adjustable lifting pads
• Dual hydraulic chain drive cylinders
• Aluminium motor for improved cooling capacity during high work demands
• Single point manual lock release
• Top limit switch with safety bar prevents vehicle damage
• Compliant with Australian Standards
• Manufactured to stringent European CE Standards

Product

RAV 4 Post, 12T Electro-Hydraulic Hoist

Ravaglioli

Product Code: KP442E

RAV made in Italy
For truck, buses & large industrial vehicles
3 phase motors 4 x 2
Capacity: 12T
Standard platform length: 8 metres
Weight: 3070kg
Manufactured in Italy, compliant to strict CE standards
Approved here to Australian standards by Worksafe

Product

RAV 6 Post Mobile Lift, 7T Per Column, Hoist

Ravaglioli

Product Code: RAV244

PLC programmable controller with self-diagnostic system ensures synchronisation of all columns
Several operating modes possible
Thermal protection against overload of motors
Low voltage controls (24V) on all columns, dead-man push buttons and safety interlock
Lifting spindles in rolled steel with bronze main nut and safety nut
Master column with a main control panel and slave column with a secondary control panel and emergency stop button combine to effect the vehicleÕs lifting and descent
Indoor and outdoor, 6 to 8 columns and higher capacity per column models all available
Hydraulic towing jack available on request
Manufactured in Italy, compliant to strict CE standards
Approved here to Australian standards by Worksafe

Product

Ravaglioli 2-Post 3.5t Electric Vehicle Hoist

Ravaglioli

Product Code: KPX357EV

• 3.5t lifting capacity

• 3 phase power supply

• 2 x 2.6Kw motors

• Versatile lifting of all vehicle types, EV and conventional

• Low profile arms rotating terminal easily reaches pick up points by moving the arm body away from the chassis

Lifting arms can operate either straight or tilted up to 90 

• High strength, high quality components

• Minimal arm space requirement allows obstacle-free underbody work on wheels, brakes and suspension

• Clearance between columns of 2,625mm

• Maximum lift height of 1,900mm

• Easily modified for low ceiling heights down as low as 3,100mm

• Minimum arm length of 607mm

• Maximum arm length of 1,200mm

• Designed in Europe

• Manufactured in Italy

Product

Rubber Pads

Product Code: S505A5

• 120mm set of 4

S505A2 Cross beams also available

Product

3.2t 2-Post Electro-Mechanical Clear Floor Hoist

Ravaglioli

Product Code: KPX337WK

• Short arms with longer reach, recommended to lift off-road vehicles
• Double thread pads with a minimum height of 95mm only KPX337WR 4.2t Electro-Hydraulic Clear Floor Hoist, double thread pads with a minimum height of 80mm & extra low profi le arms, parallel to the floor
• Extra low profi le arms, parallel to the floor

Product

3.2t Electro-Mechanical Clear Floor Hoist

Ravaglioli

Product Code: KPX337LWR

• CE approved lift with low voltage controls
• Automatic and permanent nut lubrication system to guarantee efficient lubrication during lifting and descent
• Main nut made of bronze (no plastic) with high resistance to wear, for greater safety
• Arms suitable for quick drop-in extensions
• Extra low profile arms, parallel to the floor
• Double thread pads with a min. height of 80 mm only

Product

4.2t 2-Post Electro-Mechanical Clear Floor Hoist

Ravaglioli

Product Code: KPN349WEK

• Lifting capacity of up to 4,200kg
• Superior lifting height of 2,020mm
• 3-stage short arms and 2-stage long arms
• Width between columns of 2,650mm
• Overall hoist height of 3,873mm and overall hoist width of 3,420mm

Product

2-Post 3.2T clear floor hoist - Electro-Hydraulic type with low arms

Product Code: KPH370.32R

2-Post 3.2T clear floor hoist - Electro-Hydraulic type with low arms

Product

RAV 4.2t Electro-Hydraulic Clear Floor Hoist

Ravaglioli

Product Code: KPH370.42

• 4.2 tonne lifting capacity
• 2-stage short arms and 3-stage long arms
• Double lifting cylinders - one per column
• Superior lifting height of over 2m
• Cross beam height of 4,175mm
• Safety valve prevents overloading
• Self-controlled lowering speed
• Automatic locking and unlocking
• Minimum Pad Height 95mm
• Minimum Building Height Requirement 4,200mm
• Switch is directly connected to the motor, therefore no transformers, no connectors and no thermo-magnetic switches
• Fully complies with Australian standards
• Perfect synchronisation between cylinders regardless of weight distribution
• Equipped with a safety valve to prevent overloading in case the hydraulic hose bursts
• Arm locking devices engage automatically ensuring vehicle stability

Product

2-Post 4.2T clear floor hoist - Electro-Hydraulic type 3725mm high for low roofs

Product Code: KPH370.42-240V

2-Post 4.2T clear floor hoist - Electro-Hydraulic type 3725mm high for low roofs

Product

2-Post 4.2T clear floor hoist - Electro-Hydraulic type 3725mm high for low roofs

Product Code: KPH370.42-VAR3725

2-Post 4.2T clear floor hoist - Electro-Hydraulic type 3725mm high for low roofs

Product

2-Post 4.2T clear floor hoist - Electro-Hydraulic type 5000mm extra high

Product Code: KPH370.42-VAR5000

2-Post 4.2T clear floor hoist - Electro-Hydraulic type 5000mm extra high

Product

5.5t 2 Post Clear Floor Hoist

Ravaglioli

Product Code: KPH370.55LIKT

• 5.5 tonne lifting capacity
• Four long 3-stage arms
• Distance between columns of 2800mm
• Hoist height of 4950mm
• Hoist width of 3540mm
• Maximum lifting height of 2040mm
• Minimum lifting height of 125mm
• Safety valve prevents overloading
• Perfect synchronisation between carriages
• Asymmetric lifting of long wheel base vans

Product

5.5t 2-Post Clear Floor Hoist

Ravaglioli

Product Code: KPH370.55LIK

• 5.5 tonne lifting capacity
• Distance between columns of 2,800mm
• Hoist height of 4,950mm
• Hoist width of 3,340mm
• Maximum lifting height of 2,040mm
KPH370.55LIKT Model equipped for extra long vans, distance between columns of 3,000mm

Product

3.5t 2-Post In-ground Piston Lift

Product Code: RAV1110NK

• Fast lifting speed - 30 seconds up / 24 seconds down
• Perfect synchronisation between cylinders regardless of load distribution
• Equipped with safety valve to prevent overloading and in case of hydraulic pipe fracture

Product

Automotive 1t Single Post Hoist

Alemlube

Product Code: AA101P

• Load capacity of 1,000kg
• 240V single phase power supply
• Hydraulic cylinder lifting mechanism
• Two safety electromagnetic locking devices installed in the column
• Rise time of 50 seconds
• Two speed descending time of 20 seconds / 40 seconds
• Max. lifting height: 1750mm
• Each platform measures 350mm wide
• Platform length of 1,850mm, with ramps 2010mm
• Max. platforms adjustable width setting: 1500mm
• Min. platforms adjustable width setting: 1060mm
• Overall hoist height: 2826mm
• Overall hoist length: 2395mm
• Weight: 500kg

Product

4.0t 2-Post Hydraulic Clear Floor Vehicle Hoist

Product Code: AA40CF2P

• 4,000kg Lifting capacity
• Includes 4WD extensions
• Lifting height of 1,800mm
• Minimum height of 100mm
• Quality components throughout
• Standard height clearance of 3,900mm 
• High lifting capacity of 4t
• Fast lifting time of 60 seconds
• Fast descent time of 18 to 40 seconds
• Asymmetric lift arm design incorporating 2 and 3 stage arms with toe protection and automatic engaging safety arm locks
• Large diameter lifting pads comfortably accommodate large & small vehicles
• Maximum lifting height of 1,900mm
• Minimum lowered height of 100mm
• Electric safety lock operation
• Distance between columns of 2,760mm
• Drive through width of 2,640mm
• Standard economical 3 phase power with optional 240 volt power pack
• Aluminium motor for improved cooling capacity during high work demands
• Low voltage controls offer greater operator safety
• Quality components throughout
• Australian Worksafe compliance: Design Registration Number: WAH 20951
• Manufactured to stringent European CE Standards

Product

Automotive 4.0t 2-Post Hydraulic Clear Floor Hoist

Alemlube

Product Code: AA40CF2P-240V

• 4,000kg Lifting capacity
• Includes 4WD extensions
• Lifting height of 1,900mm
• Minimum height of 100mm
• Quality components throughout
• Standard height clearance of 3,900mm 
• High lifting capacity of 4t
• Fast lifting time of 60 seconds
• Fast descent time of 18 to 40 seconds
• Asymmetric lift arm design incorporating 2 and 3 stage arms with toe protection and automatic engaging safety arm locks
• Large diameter lifting pads comfortably accommodate large & small vehicles
• Maximum lifting height of 1,900mm
• Minimum lowered height of 100mm
• Electric safety lock operation
• Distance between columns of 2,760mm
• Drive through width of 2,640mm
• Standard economical 3 phase power with optional 240 volt power pack
• Aluminium motor for improved cooling capacity during high work demands
• Low voltage controls offer greater operator safety
• Quality components throughout
• Australian Worksafe compliance: Design Registration Number: WAH 20951
• Manufactured to stringent European CE Standards

Product

4.0t 2-Post Hydraulic Floor Base Hoist

Product Code: AA40FB2P

• Lifting capacity of 4,000kg
• Lifting height of 1,900mm
• Minimum height of 100mm
• Inside column height of 2,824mm
• Post height of 2,826mm
• Lifting time of 55 seconds
• 115% dynamic loading and 150% static loading test
• P54ABS control box and 24V operating button
• Electrical single release
• 2.2kW aluminium motor

Product

Automotive 4.0t 2-Post Hydraulic Floor Base Hoist

Alemlube

Product Code: AA40FB2P-240V

4.0t 2-Post Hydraulic Floor Base Hoist
• Lifting capacity of 4,000kg
• Lifting height of 1,900mm
• Minimum height of 100mm
• Inside column height of 2,824mm
• Post height of 2,826mm
• Lifting time of 55 seconds
• 115% dynamic loading and 150% static loading test
• P54ABS control box and 24V operating button
• Electrical single release
• 2.2kW aluminium motor

Product

Automotive 5t Hydraulic Floor Base Hoist

Alemlube

Product Code: AA50FB2P

• High lifting capacity of 5t
• Lifting height of 1,900mm
• Minimum height of 100mm
• Inside column height of 2,824mm
• Post height of 4,498mm
• Lifting time of 55 seconds
• 115% dynamic loading and 150% static loading test
• P54 ABS control box and 24V operating button
• Electrical single release
• 2.2kW aluminium motor

Product

4.0t 4-Post Electro-Hydraulic Hoist

Product Code: RAV4401

• Adjustable platforms to accommodate varying vehicle widths
• Automatic mechanical back up safety devices with pneumatic release allow for stationary operation with loaded cables
• Immediately triggered safety stud devices operate in the event of a cable slackening or failing
• An automatic anti-toe trapping alarm during the final stages of vehicle hoist decent supplied standard

Product

4.0t 4-Post Wheel Alignment Hoist

Ravaglioli

Product Code: RAV4402

• Lifting capacity of 4 tonne
• Adjustable platforms to accommodate different vehicle widths optimises access to the underside of a vehicle
• Automatic mechanical back up safety devices with pneumatic release allow for stationary operation with loaded cables
• Immediately triggered safety stud devices operate in the event of a cable slackening or failing
• An automatic anti-toe trapping alarm during the final stages of vehicle hoist descent supplied standard
• Mechanical, electrical and hydraulic safety devices all in compliance with Australian and CE Safety Standards
• Includes rear slip plates and wheel alignment turntable recesses

Product

5.0T 4-Post Electro-Hydraulic Hoist

Ravaglioli

Product Code: RAV4501L

• Long 5,700mm platform with adjustable width
• Automatic mechanical backup safety devices with pneumatic release
• Automatic anti toe trap alarm during final stages of lift descent
• Mechanical, electrical and hydraulic safety devices in compliance with the prevailing standard for CE marking

RAV4502L Extra-long platforms for total wheel alignment with front turning plates locations and rear slip plates

Product

Ravaglioli 5.0t Electro-Hydraulic 4-Post Wheel Alignment Hoist

Ravaglioli

Product Code: RAV4502L

Extra-long platforms for total wheel alignment with front turning plates locations and rear slip plates

Hydraulic cylinder is located inside the fixed platform and thus perfectly protected

High resistant, galvanised and pre-stretched metal cables

Automatic mechanical back-up safety devices (every 100mm) with pneumatic release allowing stationary operation with unladen cables

Manufactured in Italy

Product

5T 4 Post Wheel Alignment Hoist OPEN FRONT

Ravaglioli

Product Code: RAV4506OF

• Extra-long platforms for total wheel alignment with front turning plates locations and rear slip plates
• Hydraulic cylinder is located inside the fixed platform and thus perfectly protected
• High-resistant, galvanised and pre-stretched metal cables
• Large-diameter pulleys with self-lubricating and maintenance free bushes
• Adjustable platform to accommodate different vehicle tracks
• Automatic mechanical back-up safety devices (every 100 mm) with pneumatic release allowing stationary operation with unladen cables
• Immediate-triggering safety stud devices in case a cable slackens or fails
• Automatic anti-toe trap alarm during final stages of hoist descent
• Mechanical, electrical and hydraulic safety devices (CE marking)
• Extra-long platforms for total wheel alignment, with front turning plates locations and rear slip plates

Product

4-Post 6.5T wheel alignment hoist

Product Code: RAV4652L

Product

6.5t 4-Post Electro-Hydraulic Commercial Vehicle Hoist FLAT RUNWAYS

Ravaglioli

Product Code: RAV4651L

• 6.5 tonne lifting capacity
• Large clearances between the posts enable easy loading of wide vehicles
• Ideal capacity for larger type vans and medium size trucks
• Main hydraulic cylinder is located inside the fixed platform providing it with maximum protection
• High resistance, galvanised and pre-stretched metal cables
• Large diameter pulleys with self-lubricating and maintenance free bushes
• Ideally suited for use in mine site, council, contractor and truck workshops

Product

8.0t 4-Post Electro-Hydraulic Commercial Vehicle Hoist

Ravaglioli

Product Code: RAV4800

• Hydraulic cylinder is perfectly protected inside the fixed platform
• High resistance, galvanized and pre-stretched metal cables
• Large diameter pulleys with self-lubricating and maintenance free bushes
• Adjustable platform to accommodate different vehicle tracks and optimised access to vehicle underside
• Automatic mechanical back-up safety devices (every 100mm) with pneumatic release allowing stationary operation with unladen cables
• Mechanical, electrical and hydraulic safety devices in compliance with the CE standard

Product

4-Post 8T hoist (Supplied with Jacking Beam Rails S4800A4/M)

Product Code: RAV4800-R

• Hydraulic cylinder is perfectly protected inside the fixed platform
• High resistance, galvanised and pre-stretched metal cables
• Large diameter pulleys with self-lubricating and maintenance free bushes
• Adjustable platform to accommodate different vehicle tracks and optimised access to vehicle underside
• Automatic mechanical back-up safety devices (every 100mm) with pneumatic release allowing stationary operation with unladen cables
• Mechanical, electrical and hydraulic safety devices in compliance with the CE standardSupplied with Jacking Beam Rails S4800A4/M

Product

4-Post 8T wheel alignment hoist

Product Code: RAV4802

Product

14.0t Electro-mechanical 4 Post Vehicle Hoist

Ravaglioli

Product Code: KP442NE

• Maximum access to the vehicle is provided due to the unique feature of extended platforms
• A safety micro-switch is activated after main nut failure and the electro-mechanical safety system ensures perfect horizontal lifting of the platforms and a balanced load on the motors regardless of vehicle position
• Ideal for transport companies, fleet owners, government authorities, mine site and contractor workshops
• Other larger and smaller 4 post commercial vehicle hoists available upon request

Product

24t Electro-mechanical Truck and Bus Hoist

Ravaglioli

Product Code: KP440NE

• Lifting capacity of 24,000kg
• 8m standard platform length suitable for trucks, buses & large industrial vehicles
• Lifting height of 1,610mm 
• Post height of 1,970mm 
• 3 phase motors 
• Manufactured in Italy, compliant to strict CE standards and approved to Australian standards

Product

4.5t 4-Post Alignment Hoist

Product Code: AA454P

• Conventional 4-Post hoist designed for general under vehicle service  and specialist exhaust system operations 
• Heavy duty lifting capacity of 4,500kg
• Maximum lifting height of 1,896mm
• Minimum lowered height of 246mm
• Overall length of 6,288mm
• Overall width of 3,342mm
• Width between columns of 2,742mm
• Air operated safety lock system

Product

Automotive 4.5t 4-Post Wheel Alignment Hoist

Alemlube

Product Code: AA454PA

• Heavy duty lifting capacity of 4,500kg
• Overall length of 6,288mm
• Overall width of 3,342mm
• Width between columns of 2,742mm
• Conventional 4 post hoist designed for precise wheel alignment procedures and general under vehicle service operations
• Integrated rear wheel slip-plates
• Maximum lifting height of 1,896mm
• Minimum lowered height of 246mm
• Minimum descent time of 60 seconds
• Air operated safety lock system
• Economical 3 phase power
• Aluminium motor for improved cooling capacity during high work demands
• Low voltage controls offer greater operator safety
• Quality components throughout including Italian made hydraulic pumps
• Optional rolling hydraulic jacking beams available
• Compliant with Australian Standards
• Manufactured to stringent European CE Standards

Product

4.2t Scissor Lift with Wheel Free Device

Product Code: RAV640.2ISI

• Lifts with large size platforms and sturdy structure assuring maximum rigidity and working stability
• Rear slip plates with pneumatic locking in true position
• Mechanical locking device with automatic engagement and pneumatic release, ensuring maximum safety

RAV650.2.55ISI 5t and RAV660.2.55ISI 6t also available

Product

3.2t Mid Rise Scissor Lift

Ravaglioli

Product Code: RAV1450N

• The ideal lift for servicing tyres, brakes, suspension and bodywork
• Low voltage controls (24V); 2.6kW motor and 85psi (6bar) air pressure
• All pivot points fitted with self lubricating bushings for long life
• This lift of the latest generation has the following features: electro-hydraulic operation, high loading capacity and elevated lifting height, rapid cycle times
• A mechanical levelling system assures constantly level lifting platforms regardless of weight distribution

Product

3.0t Electro-hydraulic Full Rise Scissor Lift

Ravaglioli

Product Code: RAV518NL

• Ideal for space saving in small, medium or large workshops
• Minimum height 95mm
• No cross rails or torsion bars between the lifting platforms ensures clear access to the underside of the vehicle
• Controlled speed during the initial lifting and final lowering phase of the hoist supplied standard

Product

RAV Scissor Lift, 3T, Electro-Hydraulic, Inground, Hoist

Ravaglioli

Product Code: RAV518NLI

• RAV made in ItalyIn ground electro-hydraulic model with a lifting capacity of 3T
• Ideal for space saving in small, medium or large workshops
• No cross rails or torsion bars between the lifting platforms ensures clear access to the underside of the vehicle
• A patented synchronisation device in the hydraulic system assures equal lifting platform height regardless of vehicle weight distribution
• Controlled speed during the initial lifting and final lowering phase of the hoist supplied standard
• All pivot points manufactured with lubricating bushes ensure a long service life
• Manufactured in Italy, with mechanical, electrical and hydraulic safety devices all in compliance with • Australian and CE Safety StandardsMotor: 2.6kwWeight: 720kg

Product

4.0t Electro-Hydraulic Full Rise Scissor Lift

Ravaglioli

Product Code: RAV540

• No cross rails between the lifting platforms ensures clear under vehicle access
• Equal lifting platform height regardless of vehicle weight distribution
• Minimum height 135mm
• Controlled speed during initial lifting and final lowering phase
• High capacity model with longer extendable platform for longer vehicle

Product

25t Commercial Vehicle Lift

Ravaglioli

Product Code: RAV825.10

• 25t lifting capacity
• Long platform length of 10m
• No cross rails or torsion bars between lifting platforms
• Ribbed anti-slip steel plate platform surface
• Electronic platform synchronisation, independant of load distribution
• Control valves check lowering speed
• Safety valves activate when overload detected
• Mechanical locking - automatic engagement & pneumatic release
• All pivot points include self lubricating bushings
• Can be supplied for recessed installation

Also available 35t with runway lengths of 6, 8, 9, & 10 metres.

Product

4.5t Low Profile Motor Vehicle Alignment Scissor Lift

Product Code: AA45LPAS

• Low profile scissor lift designed for precise wheel alignment procedures and general under vehicle service operations
• Cost saving ‘on ground’ installation
• Integrated rear wheel slip-plates
• Heavy duty lifting capacity of 4,500kg
• Maximum lifting height of 186mm
• Minimum lowered height of 180mm
• Overall length 6,500mm
• Overall width 2,070mm
• Platform width 635mm (each)
• Width between platforms 800mm 
• Air operated safety lock system
• Economical 3 phase power
• Aluminium motor for improved cooling capacity during high work demands
• Low voltage controls offer greater operator safety
• Quality components throughout including Italian made hydraulic pumps
• Optional rolling hydraulic jacking beams available
• Compliant with Australian Standards
• Manufactured to stringent European CE Standards

Product

3.5t Low Profile Mid Rise Scissor Lift

Product Code: AA35MRS

• Lifting capacity of 3,500kg
• 2.2KW aluminium motor
• 240V 15AMP single phase motor
• Noise: ≤70dB (A)
• Maximum lifting height of 960mm
• Minimum lifting height of 105mm
• Lifting speed: ≤40sec, Lowering speed: ≥20 sec.
• Platform size: 1400 x 1974 x 480mm
• Dual hydraulic locking system
• Automatic lubricating system and oil-less bearings

Product

RAV 4 Post Mobile Lift, 5.5T Per Column, Hoist

Ravaglioli

Product Code: RAV232NL

• Set of four 5.5t columns 
• Large and solid base for maximum stability under load
• Lifting spindles in rolled steel with bronze main nut and safety nut
• Master column with a main control panel and slave column with a secondary control panel and emergency stop button
• New wireless models now available

Product

Set of 4 x 5,500kg Mobile Column Lifts - Adjustable Forks

Ravaglioli

Product Code: RAV232NL-AF

• Set of four 5.5t columns
• Large and solid base for maximum stability under load
• Lifting spindles in rolled steel with bronze main nut and safety nut
• Master column with a main control panel and slave column with a secondary control panel and emergency stop button
• New wireless models now available
• Adjustable Forks

Product

Set of 4 x 7,000kg Mobile Column Lifts

Ravaglioli

Product Code: RAV241

• Automatic spindle lubrication during movements
• Large and solid base for maximum stability under load
• Lifting spindles in rolled steel with bronze main & safety nuts
• Guarantee balanced lifting position at any position
• All control panels fitted with emergency stop button
• Mechanical towing jacks to each column
• Also available: 6 and 8 column versions
Only 2 shown in image

Product

Set of 4 x 8,500kg Electro-Mechanical Mobile Column Lift

Ravaglioli

Product Code: RAV261

• Automatic spindle lubrication during movements
• Lifting spindles in rolled steel with bronze main & safety nuts
• Guarantee balanced lifting position at any position
• All control panels fitted with emergency stop button
• Mechanical towing jacks to each column

Product

8.5t Commercial Vehicle 6-Post Column Hoist

Ravaglioli

Product Code: RAV263

• Electro-hydraulic lift with screws lubricated by felt pads
• Ertalon runners (10 per carriage) with low friction 
• Simultaneous operation of all columns
• Lifting capacity of 8.5 tonnes per column
• 4 column model also available

Product

40t Set of 4 10t Electro-Mechanical Mobile Column Lift

Ravaglioli

Product Code: RAV271

• 4 x 10t wireless column lifts, 40t lifting capacity
• Automatic spindle lubrication during movements
• Large and solid base for maximum stability under load
• Lifting spindles in rolled steel with bronze main and safety nuts
• Guarantee balanced lifting position at any position
• All control panels fitted with emergency stop button
• Also available: 6 and 8 column versions

Product

Set of 4 x 5.500kg Wireless Mobile Column Lifts

Ravaglioli

Product Code: RAV305H.4WS

• Wireless 2.4 GHZ communication among columns
• Each column has a lifting capacity of 5,500 kg
• Sets of 4, 6 and 8 columns can be configured
• Handles tyre diameters from 900mm to 1,200mm with a minimum run diameter of 580mm
• Each column powered by two 12V maintenance free 55A/h gel type batteries

Product

Wireless Electro-Hydraulic Mobile Column Lift

Ravaglioli

Product Code: RAV307H.4WS

• Wireless 2.4 GHZ communication among columns
• Each column has a lifting capacity of 7,500 kg
• Sets of 4, 6 and 8 columns can be configured 
• Handles tyre diameters from 900mm to 1,200mm with a minimum run diameter of 580mm
• Each column powered by two 12V maintenance free 100A/h gel type batteries

Product

Set of 4 x 8,500Kg Wireless Mobile Column Lifts

Ravaglioli

Product Code: RAV308H.4WS

• Wireless 2.4 GHZ communication among columns
• Each column has a lifting capacity of 8,500 kg
• Sets of 4, 6 and 8 columns can be configured
• Handles tyre diameters from 900mm to 1,200mm with a minimum run diameter of 580mm
• Each column powered by two 12V maintenance free 100A/h gel type batteries
Also available: RAV308H.6WS – as above but as a set of 6

Product

Set of 6 x 8,500Kg Wireless Mobile Column Lifts

Ravaglioli

Product Code: RAV308H.6WS

• Wireless 2.4 GHZ communication among columns
• Each column has a lifting capacity of 8,500 kg
• Sets of 4, 6 and 8 columns can be configured
• Handles tyre diameters from 900mm to 1,200mm with a minimum run diameter of 580mm
• Each column powered by two 12V maintenance free 100A/h gel type batteries

Note: Set of 4 shown in image